Reverse Engineering & 3D Scanning
No drawing? We'll cast it from the part.
Lost or obsolete drawings are no barrier. We 3D-scan your worn, broken or discontinued part, rebuild the CAD model, and cast a faithful replacement — proven against the model, grade-certified with a Material Test Certificate.
Metrology-grade capability
A scanner most foundries don't have
We run a Creaform HandySCAN 3D Pro blue-laser scanner — the same class of metrology trusted in aerospace and automotive QA. It captures the full surface of a part in minutes, right on the shop floor, so we can rebuild geometry a caliper or tape could never recover.
How it works
From your sample to a certified casting
Five steps, all under one roof in Rajgangpur — so quality and timelines stay in our hands.
3D scan the part
We scan your worn, broken or obsolete component to a metrology-grade point cloud — full-surface, in minutes.
Rebuild the CAD
The scan is turned into a clean, editable CAD model — restoring worn faces and reconstructing missing sections.
Make the pattern
Our in-house CNC pattern shop cuts an accurate, repeatable pattern from the model.
Cast, machine & certify
We pour your grade, finish and machine it, and issue a Material Test Certificate with heat traceability.
Prove it against the model
The finished casting is 3D-scanned again and compared to the CAD as a full-surface colour-deviation map.
What we recover
Bring us the part we can't buy a drawing for
If a critical casting has failed and the OEM is gone, the drawing is lost, or the lead time is impossible — we can help.
Common in steel plants, cement, mining, pellet and power — where machinery outlives its paperwork.
Also: dimensional inspection
Proof, not guesswork
The same scanner verifies castings you already have drawings for.
| Deliverable | What you get |
|---|---|
| First-article inspection | Full-surface comparison of the first casting to your CAD, before we run the batch |
| Colour-deviation map | A visual report showing exactly where and by how much the casting differs from the model |
| Dimensional report | Key dimensions documented alongside the heat's Material Test Certificate |
| Catch defects early | Shrinkage, warpage and core-shift a handful of caliper points would miss |
Questions
Reverse engineering, answered
Can you make a casting without a drawing?
Yes — that's the whole point. We 3D-scan your existing part (even worn or broken), rebuild the CAD model, make the pattern and cast a faithful replacement. No original drawing needed.
How accurate is the 3D scan?
Our Creaform HandySCAN 3D Pro resolves detail to 0.025 mm and holds ~0.030 mm accuracy, at 1.2 million measurements per second across the whole surface.
What if my part is worn or broken?
We scan what remains and reconstruct the original geometry in CAD — restoring worn faces and rebuilding missing sections before casting.
Which materials can you cast?
Grey iron, SG/ductile iron, manganese steel, carbon and low-alloy steel, and stainless — to standard or to your specification, certified per heat.
Start here
Send us a photo
of the part.
A photo and rough size is enough to begin. Post or bring us the sample and we'll scan it, rebuild it, and quote a faithful replacement — usually with a feasibility view within a working day.